Figure 17 Trico® wiper blade insert replacement

VIEW A	BLADE REPLACEMENT Cycle arm and blade assembly to up position, on the windshield where removal of blade assembly can be performed without difficulty. Turn ignition key off at desired position To remove blade assembly, insert screwdriver in slot, push down on spring lock and pull blade assembly from pin (View A). To install, push the blade assembly on the pin so that the spring lock engages the pin (View A). Be sure the blade assembly is securely attached to pin.
ELEMENT REPLACEMENT Insert screwdriver between the edge of the super structure and the blade backing drip (View B). Twist screwdriver slowly until element clears one side of the super structure claw. Slide the element into the super structure claws. VIEW B	4. Insert element into one side of the end claws (View D) and with a rocking motion push element upward until it snaps in (View E). VIEW D
3. Slide the element into the super structure claws, staring with second set from either end (View C) and continue to slide the blade element into all the super structure claws to the element stop (View C). VIEW C	VIEW E